DOS ain't dead

CPUID 2.15 (Announce)

posted by RayeR , CZ, 29.12.2012, 17:08

> OK, I tested CPUID 2.15 on the 65 nm E4500. Detects correctly on stock
> settings (11*200 = 2.2 GHz, and VID = 1.325V) but does not seem to report
> overclocked frequency correctly. For example (10*333 = 3.3 Ghz, VID=
> 1.400v) it still shows default frequency / VID. CPU Temperature seems
> correct.

Please could you write me clearly what values are reported and what are real?
Note: cpu seed is measured by TSC, it may not be correct on newer CPUs if some power saving like clock mudulation or EIST is used. The multiplier is readed from MSR but it also may vary. And FSB is calculated as cpuclk/mul because there's no way to measure overclocked FSB. In my case the O'C speed is reported OK:

CPU cores: 2, nominal speed: 3167MHz = 9.5*333MHz; L1 cache = 64kB, 8-way
TSC measured CPU core speed: 3413MHz = 9.5*359MHz; L2 cache = 6144kB, 24-way

(I slightly clocked FSB from 333 to 360MHz)
Then could you compare the Vcore with values reported by ThrottleStop or CPU-Z under windows? Maybe it should be lower. I need to guess offset and mV per LSB.

---
DOS gives me freedom to unlimited HW access.

Complete thread:

• CPUID 2.15 - RayeR, 26.12.2012, 02:40
  • CPUID 2.15 - Zyzzle, 26.12.2012, 05:21
    • CPUID 2.15 - RayeR, 26.12.2012, 16:45
      • CPUID 2.15 - Zyzzle, 26.12.2012, 23:10
      • CPUID 2.15 - Zyzzle, 29.12.2012, 05:00
        • CPUID 2.15 - RayeR, 29.12.2012, 17:08